■■
■■
■ Tools required
❑ Hammer
❑ #2 Phillips Screwdriver
❑ Level
❑ Tape Measure
❑ Pencil
■■
■■
■ Optional tools
❑ Electric Drill w/ #2 Phillips Tip
❑ Nail Pouch
Revision: 9-08-03
Run:
- BEFORE YOU BEGIN -
Made in the U.S.A.
- TREATING YOUR GAZEBO -
■■
■■
■ Staining...
This Gazebo Floor Panels are constructed of a long-
lasting western cedar. Untreated Cedar exposed to
sunlight will eventually weather to a silver-grey color. To
help keep original red color, applying of a minimum of
two coats of oil based penetrating stain WITHIN 30
DAYS (required by warranty).
Always wear OSHA-APPROVED safety
glasses throughout assembly process
■■
■■
■ First...
Read these instructions thoroughly before you begin
assembly. Assembly is easiest if you follow the steps
in the order shown.
In a drawing, a dotted line represents a part hidden
from view (like a part under a panel).
■■
■■
■ Check all parts
Compare parts you have to the list on page 2. If a part
is missing, circle the part in question in the parts list
and call us toll-free at 1-800-437-0784.
■■
■■
■ Preparation required
We recommend that you assemble this floor on level
ground in the location it will be used. Assistance is
necessary to handle, fit, and secure some
components. Two people are needed for some steps.
■■
■■
■ Check local zoning
Before starting construction, check with your local
building code official for any required permits,
variances, etc.
■■
■■
■ Check Floor Kit Size
10’ actual floor kit size is 9’-3” flat to flat or 10’ in
Diameter. 12’ actual floor kit size is 11’-8-3/4” flat to
flat or 12’-10” in Diameter. 14’ actual floor size has to
be a minimum of 14’-2” flat to flat or 15’ Diameter is
recommended.
#16693
10’- 8 sided Gazebo Floor
12’- 10 sided Gazebo Floor (not shown)
14’ - 12 sided Gazebo Floor (not shown)
10’, 12’ &14’ Round
Gazebo Floor
Instructions
STAIN REQUIREMENTS FOR GAZEBO FLOORS
FLOOR SIZE # OF GALLONS
10' 1
12' 1
14' 1-1/2"
Comments to this Manuals