Handy Home Products 18502-1 Instruction Manual download pdf (Page 46)

10x8 and10x16 Floor Instructions

120"

(244 cm)

96"

(244 cm)

B A

2" Nails

(5 cm)

C: Position a 48 x 96” Floor Panel flush to the outside edges of sides and back of Floor Frame. Secure panel with

two 2” nails at outside corners and one 2” nail at other corners.

10x8 and 10x16 FLOOR KIT

INSTRUCTIONS (CONTINUED)

D: Position a 23-7/8” x 96” Floor Panel flush against first panel and flush to edges of Floor Frame. Secure panel

with one 2” nail at outside corners.

Position the other 48” x 96” Floor Panel flush against second panel and flush to edges of Floor Frame. Secure

panel with two 2” nails at outside corners and one 2” nail at each of other corners.

Note: Mark a line on the Floor Panel over the center of each Floor Joist using a pencil and a piece of lumber from the kit

(or use a chalk line) to make nailing easier.

With Floor Panels flush to outside edges of Floor Frame, nail with 2” nails every 12” through Floor Panels into all

Floor Bond Boards and Floor Joists.

Your Floor is now complete. Check to be sure it is properly positioned and leveled to ground before beginning

assembly of your Wooden Storage Building.

Nails every 12" (30 cm)

through Floor Panels into all

Floor Bond Boards and Floor

Joists

16"

(41 cm)

16"

(41 cm)

16"

(41 cm)

12"

(30 cm)

32"

(81 cm)

32"

(81 cm)

2" Nails

(5 cm)

(2) 10x8

FOR 10 x 16 FLOOR BUILD TWO 10 x 8 FLOORS,

ATTACH PRIOR TO INSTALLING FLOOR DECKING

(2) 3” nails between every joist as shown

1 2 ... 41 42 43 44 45 46

Comments to this Manuals

No comments

Handy Home Products 18502-1 Instruction Manual Page 46

Comments to this Manuals

Related products and manuals for Unknown Handy Home Products 18502-1