Handy Home Products 18514-4 Use and Care Manual download pdf (Page 47)

10x4 Floor Instructions

120"

(305 cm)

48"

(122 cm)

B A

2" Nails

(5 cm)

D: Position a 48 x 96” Floor Panel flush to the outside edges of sides and back of Floor Frame. Secure panel with

two 2” nails at outside corners and one 2” nail at other corners.

10X4 FLOOR KIT INSTRUCTIONS CONTINUED

Nails every 12" (30 cm) through Floor Panels into all Floor Bond Boards and Floor Joists

16"

(41 cm)

16"

(41 cm)

12"

(30 cm)

32"

(81 cm)

16"

(41 cm)

32"

(81 cm)

2" Nails

(5 cm)

Original Floor

E: Position a 23-7/8” x 48” Floor Panel flush against first panel and flush to edges of Floor Frame. Secure panel

with two 2” nails at outside corners and one 2” nail at the other corners.

Note: Mark a line on the Floor Panel over the center of each Floor Joist using a pencil and a piece of lumber from

the kit (or use a chalk line) to make nailing easier.

With Floor Panels flush to outside edges of Floor Frame, nail with 2” nails every 12” through Floor Panels into all

Floor Bond Boards and Floor Joists.

Your Floor is now complete. Check to be sure it is properly positioned and leveled to ground before beginning

assembly of your Wooden Storage Building.

3" Nails

(7.6 cm)

Original Floor

C: Attach 10x4 Extender Floor Kit to original 10x8 or 10x10 floor kit with (2) 3” nails between every joist as shown.

1 2 ... 42 43 44 45 46 47

No comments

Handy Home Products 18514-4 Use and Care Manual Page 47